PA 1500 Tension Dead End Clamp
Standard: GB
Usage: Line Fittings
Type: Tension Clamp
PA 1500 Tension Dead End Clamp / Anchor Clamp / Tension Clamp / Suspension Clamp / Strain Clamp / ABC Clamp Fittings / Hardware Fittings






Technics: | Plastic |
Standard: | GB |
Usage: | Line Fittings |
Type: | Tension Clamp |
Conductor Range: | 25-50mm2 |
Application: | Low Voltage 1kv |
Basic Info.
Model NO.: PA1500
Weight: 425g
Destructive: 10-13kn
Material: Nylon Plus Fiber Glass PA66
Transport Package: Export Carton
Specification: Anchoring clamp
Trademark: COWINELEC
Origin: China
HS Code: 8536909000
Production Capacity: 500, 000 PCS Per Month
Product Description
PA1500 ABC Cable Aerial Electrical Fittings Anchoring Connector
Introduction
The anchoring clamp is designed to anchor LVABC lines with insulated neutral messenger.
The stainlessteel flexible bail is equipped with an movable insulating saddle and the two sleeves are compressed on the ends and locked on the clamp body.
Feature
1. High mechanical stability
2. Reduced dimensions for easier handling
3. The cable gripping device avoids damage to sheath
MODEL | CROSS-SECTION ( mm2) | Destructive |
PA1500 | 25-50 | 10-13KN |



(Performance Testing)
2.1 Mechanical performance: the grip force of the wire clamp is 1/10 bigger than the break force of the lead. It comply with GB2314-1997.
2.2 Temperature rise performance: under the conditìon of big current, the temperature rise of connector is less than that of connection lead.
2.3 Heat circle performance: confirms to GB/T2317.3-2000, the beat circle trial standard for electric fitting.
2.4 Waterproof insulatìon performance: confirms to the relevant requirements in Part 2 of GB/TI3140.4-1998.
2.5 Resistance to corrosion performance: under the conditìon of SO, and salt fog, it can do three tìmes of fourteen days circle testìng.
2.6 Environmental aging performance: under the circumstance of ultraviolet, radiation, dry and moist, expose if with change of temperature and beat impulse for six weeks.
2.7 Fire-proof performance: insulation material of the connector withstands glowing filament test. Confirm to the requirements in Chapter4-1 0 of GBrr5169.4.

Hot Tags: pa 1500 tension dead end clamp, China, pa 1500 tension dead end clamp manufacturers, suppliers, factory, pipe holding clamp, flush mount meter socket, wood bar clamps, residential electric meter base, fuse trip switch, fuse tap switch
You Might Also Like
Send Inquiry















